INTERCHANGE: Long Exposure, Pinhole Photography

The second workshop that I chose was Long Exposure Digital Pinhole photography. I chose this workshop because I have always had an interest in photography, and this is one area that I have no experience in. It was also interesting learning more about the different settings on the camera and how each setting effects the overall image. This is something that I think I'm going to take forward when photographing work, and possibly other subjects.

To create the pinhole we took a lens cap with a drilled hole and and a piece of aluminium can. We pierced a hole in the piece of can, placed a piece of dark film over the pierced aluminium can and stuck both over the lens cap. We then placed the pin hole lens cap on to the camera with out the main lens. This allows us to play with the exposure with the sensor and create interesting images. Plus the pin hole is the aperture that we are restricted to.

The overall photos were really interesting, although it was difficult trying to get any detail in the photographs. We decided to stay near the university while taking photographs. We found some interesting areas to photograph, including the river and buildings around the university.

I would definitely would want to try this again sometime, and really try and see what kind of images I can create. However, I'm not sure how I can link this into my current practice. I might have to research this area further.

Comments

Screen Prints & Lino....

After doing the CMYK prints, I decided to experiment with the prints. The first lot of experiments I used my lino prints and printed on top of them. I had also cut out some smaller lino designs to print alongside the main lino print, and also decided to cut out most of the background and the text of my main lino design. I then printed each design separately - the main design first, then the flowers, then both lino's together. I really like how these designs have come out. I might try this out on my newspaper print, and then possibly stick it in a public space? Something that I'm considering. I like the contrast of the bold images over the text and I feel like these alone would be an effective series. I might just stick these up in a white wall and document them as a series to see what they would look like. Perhaps even individually. I might take this further and do more prints, perhaps experiment with different colours and perhaps introduce an element of collage, even perh...

BA2b - SELLOT Exhibition: Planning and designs....

As well as Anteros, I'm helping to organise another exhibition in relation to the ARTAGRAM exhibition that we did near the end of BA2a. For this exhibition we decided to explore the idea of commercialism, and what is considered art. We are using the gallery space as a pop shop instead, and will be creating products that we will hopefully sell. The products that we hope to sell include t-shirts, prints, postcards, sculptures, craft pieces and so on. For the initial stages, we have been brainstorming designs for the name of the exhibition, postcards and the initial poster designs and colour scheme. For the postcards, I made some designs based off of my practice - using feminist slogans and gender symbols. I stuck to the same colour scheme of pinks, whites and teal - which are going to be the main colours used in our publication. I experimented with different effects on the text, used the same techniques that I used for previous di...

INTERCHANGE: Japanese Book Binding....

For the first workshop of the interchange event I chose to do Japanese book binding. I thought it would be good to learn a new skill, and after creating the books, I thought I could use these in our SELLOUT exhibition. There are 3 main types of Japanese book binding; Yotsume Toji (four hole) binding, Kikko Toji (tortoise shell) binding and Asa-No-Ha Toji (hemp leaf) binding. I chose the four hole binding and the tortoise shell binding. The first stages of Japanese book binding involve folding sheets of Japanese paper in half. We folded 20 sheets of paper in half to create 40 pages. We then flattened them down with a bone tool, covering the folded pages with photocopier paper before doing so. After the folded sheets were flattened, we collated them together, cut another sheet of paper to the size of the pages, which would be then be stuck to the cover later on in the process. Once the backing of the cover and the pages are all aligned, we then measured out the margin for th...

BA2 Fine Art - Reflective Journal

Search This Blog